I really like the way Lex PH2LB measures and demonstrates the effectiveness of the Hi-Per-Mite CW filter designed by David Cripes NM0S. Watch the short video above. The blue trace is the audio input to the filter, the orange trace is the output. Watch the output change as Lex sweeps the audio frequency range.
He wrote:
After studying the schematic I shifting through my spare parts stock to collected the components and build one according there design on a breadboard (I changed the center frequency from 700 to 600Hz).
I hooked up my signal generator with a amplitude of 2v max and sweeped it from 250Hz to 2KHz looking at the output on my rigol osciloscoop. On 2khz VMAX=0.04V, 885Hz=0.2V, 700Hz=1.5V, 662-585Hz=2V, 400Hz=0.2V, 500Hz=0.9V, 250Hz=0.04V. So a nice flat top between 585Hz to 662Hz.
A full description of Lex’s project (with more videos) is here:
https://www.ph2lb.nl/blog/index.php?page=ubitx-mods3#ubitx-mod14
Lex’s Knack Story and the intro to his blog is here: https://www.ph2lb.nl/blog/index.php?page=history

Wow! this is Amazing! Which Friend character are you ? Scratch here to find out which Friend character are you ? ████████████████████████████████████████████████████████████████████████████████████████████████
Your pants, they bother me. Take them off! Hey, i am looking for an online sex partner 😉 Click on my boobs if you are interested (. )( .)
Is sex dirty? Only when it’s being done right. Click here and Check me out i am getting naked here 😉
Your clothes would look nice on my bedroom floor. Click here and Check me out i am getting naked here 😉
I admit, I have a tremendous sex drive. My boyfriend lives forty miles away. Click here and Check me out i am getting naked here 😉