Back to the Barebones (Receiver)

My rehabilitation of homebrew 17 meter gear from the last solar cycle continues. Following the same path that I followed in 2001-2002, I will now move from DSB to SSB. I pulled out the little receiver that I put together way back when. It is a version of Doug DeMaw’s “Barebones Superhet” (aka “Barbados Superhet”). I bought it on the net. It had been put together by a skilled builder on a FAR Circuits board. The fellow who built it had changed the IF from Doug’s original color burst freq (3.579 MHz) to 5 MHz. He had also put in a varactor controlled VFO using a DC voltage multiplier to get more voltage variation across the varactor. I also think he had it built for 20 meters.

I converted it to a 17 meter receiver. I put in a VXO, using two crystals controlled by a panel switch. I also changed the caps in the filter so as to broaden the response for SSB.

As I was going through all these modifications, I turned to the USENET for help and advice. Dale, W4OP, came to my assistance. Little did we know how DETAILED his familiarity with my RX was:

“Bill N2CQR MOHBR” …@virgin.net> wrote in message

news:22f6e3ee.0503292244.1b9a1481@posting.google.com…

Did I sell you mine years ago? I seem to recall using a temp stabilized
varicap in a shielded enclosure for main tuning. It was done on a factory
board. Or was that a 6M xverter I sold?

Dale

Our book: “SolderSmoke — Global Adventures in Wireless Electronics”http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20