Month: May 2017

The Transistor! 1953 Bell System Film — Great Stuff!

Thermatron fans beware! There is some trash talking of tubes in this 1953 Bell film. But there is also a lot of recognition of the contribution made by our beloved valves. I especially liked the report on the historic 1915 phone transmissions from Arlington, Virginia. ( I drive past the transmitter site every work day). FIVE HUNDRED TUBES combined to send the human voice from Arlington to both the Eiffel Tower and to Pearl Harbor, Hawaii. FB OM! 59!

I was disappointed, however, that this film failed to recognize another momentous 1953 achievement in sold state electronics: In that year, 11 year-old Pete Juliano built his first solid state amplifier — an audio amp using a CK722 transistor. Read about it here: http://soldersmoke.blogspot.com/2015/03/pete-juliano-homebrwing-with.html

The fact that Pete was homebrewing solid state circuits at the time that this film was made is a reminder of the vast experience that he has, and of how much technological progress we have made in such a short period of time.

Farhan gives me a Spectrum Analyzer and W2AEW Provides the Tutorial (Video)

At Dayton, Farhan very kindly bought me a Tektronix Spectrum Analyzer. (I joked during his visit that this device might help me stay in the good graces of the FCC.) This morning I decided to learn more about this device. I Googled “Tek 1401A” and was immediately directed to a YouTube tutorial. I was pleased to see that it was from our old friend Alan Wolke W2AEW. I knew that the Tek analyzer and I were in good hands. TRGHS. Alan expertly laid out the functions of the device. I am confident that I will soon be analyzing the spectrum of my homebrew rigs, and that they will all be found COMPLETELY FREE of spurious emissions.

Alan’s tutorial is instructive for all those getting started with spectrum analyzers.

I need to find a manual and schematic for the 1410A.

Thanks Farhan. Thanks Alan. And three cheers for Beaverton, Oregon!

Indonesian BITX: Check out the BRITX

Pretty cool, don’t you think?

Here is the Google translation of the “about” portion of OM Dian Kurniawan’s blog:

Electronics is something very interesting. In it are stored many miracles of His creation. The almost limitless opportunities for creativity make electronics an art medium. Countless things are ultimately made easy and possible with electronics…. Feel free to start. Life starts from a cell. Let’s keep working for a better life. Salam.

It is obvious that OM Dian has THE KNACK and is a member of the International Brotherhood of Electronic Wizards. Does anyone know his callsign?

There is a lot of very cool stuff on his blog, including some mind-blowing applications of small, color displays. Check it all out:

https://diankurniawan.wordpress.com/


Indonesian BITX: Check out the BRITX

Pretty cool, don’t you think?

Here is the Google translation of the “about” portion of OM Dian Kurniawan’s blog:

Electronics is something very interesting. In it are stored many miracles of His creation. The almost limitless opportunities for creativity make electronics an art medium. Countless things are ultimately made easy and possible with electronics…. Feel free to start. Life starts from a cell. Let’s keep working for a better life. Salam.

It is obvious that OM Dian has THE KNACK and is a member of the International Brotherhood of Electronic Wizards. Does anyone know his callsign?

There is a lot of very cool stuff on his blog, including some mind-blowing applications of small, color displays. Check it all out:

https://diankurniawan.wordpress.com/


FDIM: W8SX Interviews Mike Bryce WB8VGE

Mike Bryce’s many contributions to the radio art and QRP definitely puts him in the Homebrew Hero category. I have Mike’s “Hotwater Handbook” (about the legendary HW-8) on my bookshelf. Our intrepid SolderSmoke media team (Bob W8SX) spoke to Mike at FDIM 17. His comments on the joy of a good troubleshoot, and on the pernicious, unfixable nature of many recently marketed appliance radios really resonated with me.

Mike has special expertise on Heathkit gear: https://www.theheathkitshop.com/index.html

Listen to the interview with Mike here:

http://soldersmoke.com/FDIM17WB8VGE.mp3

KEEP THAT GREEN FLAME BURNING MIKE!

FDIM: W8SX Interviews W8TEE on Facelifts for SSB Rigs

Our intrepid correspondent Bob Crane interviewed FDIM speaker Jack Purdum W8TEE. Jack made some very intriguing comments on his efforts to enhance the beloved BITX transceiver. CW! AGC! Speech processing! Woo hoo! We await more details on how to acquire the board that Jack describes.

 Jack is a very accomplished guy who has made many contributions to the radio art, most recently on Arduino microcontroller projects: https://www.qrz.com/db/W8TEE

Listen to Bob’s interview with Jack here:

http://soldersmoke.com/FDIM17W8TEE.mp3

Thanks Jack! Thanks Bob!

Here are is the manual, bill of materials, and schematic for Jack’s board:

http://soldersmoke.com/W8TEEschematic.pdf

 http://soldersmoke.com/W8TEEmanual.doc

 http://soldersmoke.com/W8TEEbom.doc

Homebrew Peppermint BITX: KC1FSZ Goes Scratch-built and Sweeps a Filter

Hi Bill/Pete:


Congratulations to Bill on the award. Very well deserved!

I just watched the video that Bill made with Farhan and I really enjoyed it. As usual, lots of useful information there.

Farhan’s demo of the Sweeperino was particularly timely because this past weekend I was doing something very similar.

As I’ve mentioned to Bill before, I am working on a scratch-built BITX to accompany the Peppermint BITX-40 module rig that I’m running right now. I took Pete’s advice and started from the audio end. After building the audio amplifier, product detector, and first/last pair of IF amplifiers, I was able to connect the VFO where the BFO is supposed to go and enjoy a pretty reasonable direct conversion receiver. It works great!! My first working receiver.

So my next step was the crystal filter. I puzzled over all of the different articles, tried to follow the G3UUR method, sorted crystals, etc. and finally put the whole thing together. But all along I’ve had this doubt that I could have possibly followed all of the steps closely enough to achieve the precision needed for a 3.5 KC SSB filter – it just didn’t seem possible.

Last week I decided to try to “sweep” the filter. This was a multi-day undertaking in itself. I pieced together the microprocessor, an AD9850, a TIA amplifier, the RF power detector from the SSDRA book, and some software that generates the necessary frequency sweep and collects power readings. The picture of the test rig is included below. It’s not much to look at.

With low expectations (and wires that are too long), I ran a few seeps and then downloaded the data onto my computer for analysis. No fancy software here, I’m just using Excel. When I put the data into a line chart in Excel, what emerged from the jumble of seemingly random numbers was a thing of beauty: a 3.5 KC passband right below 12 MHz. It’s the next stage beyond the Joy of Oscillation: The Joy Of Selectivity!


It’s even showing about the right insertion loss. Note the setup is very primitive and noisy so the fact that I can’t measure anything below -8dB isn’t surprising, you can ignore that part.

But I’m starting to get the feeling that this might actually work. Onto the diode mixer …

73s,

FDIM: Listen to Bob Crane Interview Hans Summers, G0UPL

Bob Crane, our intrepid correspondent at the 2017 Four Day in May event, caught up with Homebrew Hero Hans Summers G0UPL. Hans’s amazing web sites have been the inspiration for many projects in my shacks. My favorite so far was his QRSS transmitter using an LED based multivibrator circuit to generate a shark fin pattern on grabber screens. That was fun. I am now really tempted to send one of Hans’s WSPR transmitters into the stratosphere using party balloons.

Listen to the interview here:

http://soldersmoke.com/FDIM17G0UPL.mp3

 Visit Hans’s QRP-Labs here:

https://www.qrp-labs.com/

Thanks Bob! Thanks Hans!

Video: Farhan in the SolderSmoke Shack! BITX, JBOTS, McDonald Straw Sig Gen, uBITX, Sweperino and more!

Thanks again to Farhan for visiting us. It was great to see his reaction to my humble implementations of his great designs. I got him to sign my BITX17. This was really a fantastic day for me and for my family.

Farhan Visits SolderSmoke Headquarters

Wow, today was an important day in the history of SolderSmoke. Our friend — and newly minted member of the QRP Hall of Fame — Ashhar Farhan VU2ESE came to see us. We had a great time. I showed him all the many devices that I built based on his designs.
We shot a video of the shack visit. I will post it to YouTube in a few days.
Thanks for coming to see us Farhan. And congratulations on the richly deserved Hall of Fame Induction.



Homebrew History is Made: Farhan @ W7ZOI

Thanks to Wes W7ZOI for sending me the link to his page describing the visit of our friend Farhan. I think this visit was a historic gathering of homebrew heroes and their groundbreaking rigs. Read all about it here: http://w7zoi.net/Farhan-visit.html


Please help me convince Farhan to visit SolderSmoke HQ before returning to India! Send him (or me) e-mails, texts, tweets, or just post messages of support below this post.

WA8WDQ’s Automated Filter Scanner (and a tip from VK1VXG)

Bill, Pete,

Thought I’d share today’s activities. Using Bill’s excellent wire stripping technique, I was able to finish assembling my 7 MHz bandpass filter. At this point, I’d normally terminate the filter then hook up the signal generator and oscilloscope to manually scan/observe the filter’s response. But today, I took a different tack. Using the AD9851/Arduino signal generator I built last year coupled with the W7ZOI AD8307 Power Meter I built this year, I wrote some additional Arduino code to scan a block of frequencies while using the Arduino’s A/D to record a level at each scanned frequency, thus characterizing the filter’s response. I also used a W7ZOI unidirectional TIA to boost the generator’s output to within the full scale range of the A/D. This setup is similar to the popular PHSNA project that has gained attention over the last couple of years. The Arduino formats the data as CSV then feeds it into Numbers (the Mac Excel equivalent.) for plotting (see attached but please forgive the labels/legend on the plots as I didn’t take the time to format them). Unfortunately, my Arduino UNO is low on RAM so I’m only able to save a max of 100 scanned frequencies. Even with the lack of resolution, as you can see, the output is definitely useable to get a sense of the filter shape and roll-off. I’m now motivated to write some plotting code so I can get a more real-time output in lieu of the spreadsheet. The output of the AD9851 seems pretty flat within several MHz as is the TIA, so the accuracy should be pretty good within moderately sized scan blocks. Adding additional external FLASH (or moving to a bigger Arduino like the Zero) will fix the low resolution. FYI – Arduino behavior when RAM is low can be very erratic! It started crashing when I got close to the max available :(.
If you haven’t as yet, definitely check out the PHSNA project. They’ve added a boat load of features beyond just scanning filter response . . . and at a fraction of the cost of a spectrum analyzer with a tracking generator.
Brad WA8WDQ

Hi Bill,
I’m having trouble posting a comment in response to Brad, WA8WDQ’s
automated Filter scanner project, and I’m hoping you wouldn’t mind
passing this tip along. It might be of use to other readers too.
Recent versions of the Arduino software include a Serial Plotter feature
that lets you graph directly from your arduino. By making use of this
feature Brad wouldn’t need to save data on the uno – just send it back
to the computer and graph in realtime. It is a little primitive, but
still usable. I believe the plot window is 500 datapoints wide.
There is a nice tutorial on how to use it here:
If you’re in a hurry and can survive with a bit of inaccuracy in your
sweep measurement you can also get away with using a simple diode
detector RF probe. This is good enough for a “yep, that filter does
what I want” measurement, but not for measuring exact loss or 3db
bandwidth etc.
Hope that helps,
73s
Greg, VK1VXG

An NE602 SSB Design from China: The KN-Q7 by BA6BF

Allison KB1GMX alerted us to this rig. Pete and I had been discussing with her various designs for SSB transceivers. I recently completed an NE602 rig.

I really like the KN-Q7 (click on the picture above for a closer look). The T/R switching is much simpler than my use of three DPDT relays. It even seems simpler than the Epiphyte’s switching of the BFO and VFO frequencies. I also like the analog VFO and BFOs inside the 602s, but I think Pete would use an Si5351. The AF amp muting circuit is kind of neat.

I questioned the need for the extra IF amp for the receiver. My rig just uses the two NE602s and an AF amp circuit from the BITX40 module (2N3904 and an LM386), and with this I can hear the band noise floor on 40. But Allison points out that different bandpass and crystal filter have different losses, so with these components some additional gain may have been necessary. YMMV.

Here is the kit manual:
http://www.qsl.net/bd6cr/knq7amanual.pdf
Here is a video of VK2TPM putting his KN-Q7 on the air:
It is interesting that Peter notes a need for additional mic gain. Some of the NE602 rig designs run an electret mic right into the NE602 balanced modulator with no mic amp. For a few days I had my amplified D-104 mic running into the NE602 in this way. I too found that I was having to “loud talk” into the mic. I put an LM741 mic amp in there and it fixed the problem. I wonder if later versions of the KN-Q7 included a mic amp. I will check on this later.
Three cheers for designer Shi Ke, BA6BF!

Still Photos and Slow-Motion Video from Shenandoah Rocket Launches

The above slow-motion video of launch #3 is pretty cool. You can very briefly see a bit of the yellow parachute deploying. The best video from this flight is at the end, as the rocket floats over the farm buildings and comes perilously close to landing on top of one of the silos. I put some snap shots at the end. Five other launch videos are available here: https://www.youtube.com/user/M0HBR/videos

SNAP SHOTS
Launch crew visible – N2CQR with hat, Billy to his left. Randy’s son (next to Billy) launches the rocket!

Smoke trail back to the launch pad.

MECO! And you can see the smoke trail up to the rocket

The view across the Shenandoah Valley.

Skyline Drive runs along that ridgeline

Here is a hunk of flame-proof wadding ejected by the rocket.

We were afraid it would land on the silo. It was close.

GREAT BALLS OF FIRE! And a smoke trail.

Part of the deploying parachute is visible.

SolderSmoke Podcast #196 Rockets, Pete’s EXPULSION, SDR, DiFX, ‘602 rigs, T.O.M.

View from rocket. I’m in front of the swing-set, with hat on. Billy to my left.

SolderSmoke Podcast #196 is available.
5 May 2017
http://soldersmoke.com/soldersmoke196.mp3

 Shenandoah Rocket Launch — With video!


Pete and the QRPARCI HOF: We thank you for your support!
Note the strange seasonality of these kinds of events… Always in the Springtime…
April is the cruelest month. Especially the FIRST DAY!
Feel Tech Follow-up — the DC blocking cap issue.

HBTV? Roku Challenge?

A tube of Desitin? Why?


SDR Misadventures.

SDR on a tablet Just like WA7HRG
Pi Day More RaspPi Linux observations TOO HARD
The problem of Si5351 and updated libraries — old sketches don’t work!
My SDR question: If we go with direct sampling, no need for I and Q at front end No image problem, right? But why is there often a digital I and Q in the direct sampling receivers?
BITX MODULE
Getting RF in through the DDS jack.
Electric Radio: Reading from the history of SSB. And from the T.O.M. article
Joe Carr K4IPV : Homebrew Hero from Falls Church Va. Any more info on him?
Pete’s newest DifX
Pete’s new digital scope.
Bill’s NE602 RIG, Epiphyte History.
He put AADE crystal filter impedance match circuits in backward That’s why he needed RF amp. Duh.
The perils of a crowded box
Building RF amp board (BITX Module design) for the NE602 rig.
NE602s do not put out a lot of power. uW
BITX Module Amp circuits very stable.
Chassis as the heat sink.
Mic amp? We don’t need no stinkin’ mic amp! But yes, we do. 741 on the way.
Parts on e-bay very expensive! Back to the hamfests. On to Manassas!

Congrats to Tony Fishpool G4WIF, who received the Don Cameron, G4STT, Award for an outstanding contribution to low power amateur radio at the RSGB AGM meeting in Cardiff.


 MAILBAG

Rocket Key-Chain Camera Video!


This project started almost 5 years ago when Billy, his friend Ben and I built a nice BIG Estes Model Rocket that Elisa had bought me for my birthday. Here is the original post about this:
http://soldersmoke.blogspot.com/2012/09/video-model-rocketry.html

 Building the thing was no problem, but finding a place to launch it was. Model rocket launches are prohibited inside the Washington DC beltway, and when you get outside the beltway it is hard to find a suitable open field. Out rocket camera sat in a box. We said “someday” for five years.

Yesterday I was going out to the Shenandoah Valley of Virginia picking up Billy after the completion of his freshman year in college. I decided that yesterday would be the day. I used Google Maps to look for places with a big open field near the highway. I recharged the key chain camera.

At the first of my possible launch sites we found lots of fields, but also lots of fences, and cows and horses who might not like our noisy rocket. We were about to give up hope when I spotted a farmer at work. I explained the situation to Randy. He agreed to let us launch, but wanted us to do it from his nearby house so that his family could watch. This was very nice of them.

After one failed attempt, WHOOOSH! That D12-3 engine really pushed that thing up there! The family loved it. It was great. The parachute deployed perfectly. Billy would run across the field to retrieve the rocket (you can see him running up to get it in one of the attached videos). When we got home I was amazed to find that the little camera had worked perfectly on all three launches.

The Waters Edge Rocket Research Society would be so proud of us. VIVA LA WERRS! VIVA!

Color Code Violation — Almost as Bad as Breaking Ohm’s Law!

A cautionary tale: How would you read the color code on that little resistor? It was plucked from a strip marked 2.2 ohms. And indeed it is red-red-gold. 2.2 ohms, right? But no, my friends. On the DVM it reads 2.2 kilo ohms. 2200 ohms. Believe me, that makes a big difference when it is in the Vcc line of your driver! It took me a while to find out WHY that driver wasn’t driving very well.

This turned out to be one of those very satisfying trouble-shoots — the problem was elusive and it wasn’t all my fault. But I should have MEASURED the resistor value before soldering it in.

Here is the scary part: The next resistor from the same strip was marked the same way, but measured 2.2 ohms. Be careful out there.