{"id":8767,"date":"2020-06-17T12:18:00","date_gmt":"2020-06-17T02:18:00","guid":{"rendered":"https:\/\/www.homebrewradio.us\/blog\/2020\/06\/17\/lobes-nulls-and-gain-dipoles-testing-the-theory-with-wspr\/"},"modified":"2025-07-22T01:18:56","modified_gmt":"2025-07-21T15:18:56","slug":"lobes-nulls-and-gain-dipoles-testing-the-theory-with-wspr","status":"publish","type":"post","link":"https:\/\/www.homebrewradio.us\/blog\/2020\/06\/17\/lobes-nulls-and-gain-dipoles-testing-the-theory-with-wspr\/","title":{"rendered":"Lobes, Nulls, and &#8220;Gain Dipoles&#8221; &#8212;  Testing the Theory with WSPR"},"content":{"rendered":"<div class=\"separator\" style=\"clear: both; text-align: center;\"> <a href=\"https:\/\/www.homebrewradio.us\/blog\/wp-content\/uploads\/2020\/06\/20meterpattern.jpg\" imageanchor=\"1\" style=\"margin-left: 1em; margin-right: 1em;\"><img loading=\"lazy\" decoding=\"async\" border=\"0\" data-original-height=\"209\" data-original-width=\"225\" height=\"371\" src=\"https:\/\/www.homebrewradio.us\/blog\/wp-content\/uploads\/2020\/06\/20meterpattern.jpg\" width=\"400\" \/><\/a><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"> <b>In the last podcast Pete and I were discussing dipole antennas. We mentioned dipoles that were multiples of 1\/2 wavelength and said the result could be a &#8220;gain dipole.&#8221; This provoked some head scratching. Listener Riley asked for more info. See the comments section under this post: <\/b><a href=\"http:\/\/soldersmoke.blogspot.com\/2020\/05\/soldersmoke-podcast-222-antennas.html\">http:\/\/soldersmoke.blogspot.com\/2020\/05\/soldersmoke-podcast-222-antennas.html<\/a><b>. <\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"> <b><br \/><\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"> <b>A short time later Pete was corresponding with Brad WA8WDQ who had questions about his antenna pattern. Pete recommended using WSPR to test his antenna&#8217;s effectiveness. <\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"> <b><br \/><\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"> <b>These two exchanges got me thinking about the radiation pattern of my 135 foot doublet antenna, especially on 20 meters. Where are my lobes, where are my nulls? Following Pete&#8217; advice I turned to WSPR. But first, a quick look at the PREDICTED patterns.<\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"> <b><br \/><\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"> <b>ON5AU has <a href=\"http:\/\/on5au.be\/content\/a10\/wire\/abd.html\">on his site<\/a> a great article by antenna guru L.B. Cebik W4RNL with exactly the info I needed. Above is W4RNL&#8217;s chart of predicted radiation pattern for 20 meters on a 135 foot doublet. Note the orientation of the wire.<\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"> <b><br \/><\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"> <b>My antenna is oriented almost exactly north-south (broadsides to the east and west). So with a standard north at top map, my pattern on 20 should look like that of W4RNL&#8217;s chart. What did I get from WSPR? Here is the pattern for an hour or so of 250 milliwatt transmissions from my station using the 135 foot doublet on 20 meters (using homebrew balanced tuner): <\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: center;\"> <a href=\"https:\/\/www.homebrewradio.us\/blog\/wp-content\/uploads\/2020\/06\/WSPRLobes.jpg\" imageanchor=\"1\" style=\"margin-left: 1em; margin-right: 1em;\"><img loading=\"lazy\" decoding=\"async\" border=\"0\" data-original-height=\"669\" data-original-width=\"937\" height=\"285\" src=\"https:\/\/www.homebrewradio.us\/blog\/wp-content\/uploads\/2020\/06\/WSPRLobes.jpg\" width=\"400\" \/><\/a><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: center;\"><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"> <b>You can clearly see at least three of the four predicted lobes (NE, NW, SW). <\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"> <b><br \/><\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"> <b>Now, part of this WSPR pattern could, I suppose, be the result of the geographic distribution of WSPR stations. If there are just more of them in the areas where I am seeing lobes, the pattern could just be the result of geographic distribution. I don&#8217;t think that is the case, but to test this idea (a bit) I decided to look at the 40 meter pattern. <\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"> <b><br \/><\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"> <b>Here is what W4RNL predicted (same north-south antenna orientation): <\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: center;\"> <a href=\"https:\/\/www.homebrewradio.us\/blog\/wp-content\/uploads\/2020\/06\/40meterpattern.jpg\" imageanchor=\"1\" style=\"margin-left: 1em; margin-right: 1em;\"><img loading=\"lazy\" decoding=\"async\" border=\"0\" data-original-height=\"199\" data-original-width=\"203\" height=\"392\" src=\"https:\/\/www.homebrewradio.us\/blog\/wp-content\/uploads\/2020\/06\/40meterpattern.jpg\" width=\"400\" \/><\/a><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"> <b>And here is the WSPR map that I got, again using about 250 milliwatts for about an hour): <\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: center;\"> <a href=\"https:\/\/www.homebrewradio.us\/blog\/wp-content\/uploads\/2020\/06\/40meterWSPRmap2.jpg\" imageanchor=\"1\" style=\"margin-left: 1em; margin-right: 1em;\"><img loading=\"lazy\" decoding=\"async\" border=\"0\" data-original-height=\"416\" data-original-width=\"836\" height=\"198\" src=\"https:\/\/www.homebrewradio.us\/blog\/wp-content\/uploads\/2020\/06\/40meterWSPRmap2.jpg\" width=\"400\" \/><\/a><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: center;\"><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"> <b>I think this pattern matches nicely with the prediction. You don&#8217;t see the nulls that you see in the 20 meter pattern. You do see some stations directly north of me (as predicted). There does not seem to be a big disparity in the geographic distribution of WSPR stations.<\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"> <b><br \/><\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"> <b>One note on the use of WSPR: I started out using WSPR in receive mode, thinking that the pattern I&#8217;d see would be similar on receive or transmit due to the antenna reciprocity principle. But I worried that the results could be easily skewed by higher power WSPR stations. So I shifted to the transmit mode and limited my output to 250 milliwatts. <\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"> <b><br \/><\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"> <b>Here is the W4RNL chart showing the patterns for all the bands: <\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: center;\"> <a href=\"https:\/\/www.homebrewradio.us\/blog\/wp-content\/uploads\/2020\/06\/Lobepattern20metersdoublet.jpg\" imageanchor=\"1\" style=\"margin-left: 1em; margin-right: 1em;\"><img loading=\"lazy\" decoding=\"async\" border=\"0\" data-original-height=\"672\" data-original-width=\"631\" height=\"320\" src=\"https:\/\/www.homebrewradio.us\/blog\/wp-content\/uploads\/2020\/06\/Lobepattern20metersdoublet.jpg\" width=\"300\" \/><\/a><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: center;\"> <a href=\"http:\/\/on5au.be\/content\/a10\/wire\/abd.html\">http:\/\/on5au.be\/content\/a10\/wire\/abd.html<\/a><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: center;\"><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"> <b>Here is the azimuth chart for my location:<\/b> <\/div>\n<div class=\"separator\" style=\"clear: both; text-align: center;\"><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: center;\"> <a href=\"https:\/\/www.homebrewradio.us\/blog\/wp-content\/uploads\/2020\/06\/N2CQRAzimuthMap.jpg\" imageanchor=\"1\" style=\"margin-left: 1em; margin-right: 1em;\"><img loading=\"lazy\" decoding=\"async\" border=\"0\" data-original-height=\"829\" data-original-width=\"737\" height=\"400\" src=\"https:\/\/www.homebrewradio.us\/blog\/wp-content\/uploads\/2020\/06\/N2CQRAzimuthMap.jpg\" width=\"355\" \/><\/a><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: center;\"><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: center;\"> <\/div>\n<div class=\"separator\" style=\"clear: both; text-align: center;\"><\/div>\n","protected":false},"excerpt":{"rendered":"<p>In the last podcast Pete and I were discussing dipole antennas. We mentioned dipoles that were multiples of 1\/2 wavelength and said the result could be a &#8220;gain dipole.&#8221; This provoked some head scratching. Listener Riley asked for more info. See the comments section under this post: http:\/\/soldersmoke.blogspot.com\/2020\/05\/soldersmoke-podcast-222-antennas.html. A short time later Pete was corresponding &hellip; <a href=\"https:\/\/www.homebrewradio.us\/blog\/2020\/06\/17\/lobes-nulls-and-gain-dipoles-testing-the-theory-with-wspr\/\" class=\"more-link\">Continue reading<span class=\"screen-reader-text\"> &#8220;Lobes, Nulls, and &#8220;Gain Dipoles&#8221; &#8212;  Testing the Theory with WSPR&#8221;<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":8768,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[69,361,41,26],"tags":[],"class_list":["post-8767","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-antennas","category-cebik-l-b","category-juliano-pete","category-wspr"],"_links":{"self":[{"href":"https:\/\/www.homebrewradio.us\/blog\/wp-json\/wp\/v2\/posts\/8767","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.homebrewradio.us\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.homebrewradio.us\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.homebrewradio.us\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.homebrewradio.us\/blog\/wp-json\/wp\/v2\/comments?post=8767"}],"version-history":[{"count":1,"href":"https:\/\/www.homebrewradio.us\/blog\/wp-json\/wp\/v2\/posts\/8767\/revisions"}],"predecessor-version":[{"id":8774,"href":"https:\/\/www.homebrewradio.us\/blog\/wp-json\/wp\/v2\/posts\/8767\/revisions\/8774"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.homebrewradio.us\/blog\/wp-json\/wp\/v2\/media\/8768"}],"wp:attachment":[{"href":"https:\/\/www.homebrewradio.us\/blog\/wp-json\/wp\/v2\/media?parent=8767"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.homebrewradio.us\/blog\/wp-json\/wp\/v2\/categories?post=8767"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.homebrewradio.us\/blog\/wp-json\/wp\/v2\/tags?post=8767"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}