{"id":179,"date":"2022-08-08T14:36:00","date_gmt":"2022-08-08T04:36:00","guid":{"rendered":"https:\/\/www.homebrewradio.us\/blog\/2022\/08\/08\/polyakov-ra3aae-direct-conversion-receiver-40-meter-dc-rx-with-vfo-at-3-5-3-6-mhz-with-video\/"},"modified":"2025-07-22T18:03:25","modified_gmt":"2025-07-22T08:03:25","slug":"polyakov-ra3aae-direct-conversion-receiver-40-meter-dc-rx-with-vfo-at-3-5-3-6-mhz-with-video","status":"publish","type":"post","link":"https:\/\/www.homebrewradio.us\/blog\/2022\/08\/08\/polyakov-ra3aae-direct-conversion-receiver-40-meter-dc-rx-with-vfo-at-3-5-3-6-mhz-with-video\/","title":{"rendered":"Polyakov (RA3AAE) Direct Conversion Receiver:  40 meter DC RX with VFO at 3.5 &#8211; 3.6 MHz (with video)"},"content":{"rendered":"<p><iframe loading=\"lazy\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" frameborder=\"0\" height=\"247\" src=\"https:\/\/www.youtube.com\/embed\/5K9g4ajUQBs?rel=0\" title=\"YouTube video player\" width=\"440\"><\/iframe><\/p>\n<p><b>I&#8217;ve been reading about Polyakov (or &#8220;sub-harmonic&#8221;) Detectors for a long time: <\/b><\/p>\n<p><b><a href=\"https:\/\/soldersmoke.blogspot.com\/search\/label\/Polyakov--Vladimir\">https:\/\/soldersmoke.blogspot.com\/search\/label\/Polyakov&#8211;Vladimir<\/a><\/b><\/p>\n<p><b>But until now, I never built one. Recently, Dean KK4DAS and the Vienna Wireless Makers group have been building a Direct Conversion receiver. Their receiver uses an Si5351 as the VFO, but of course Dean and I have decided to try to do things the hard way by building non-digital VFOs. At first we just came to the conclusion that my earlier Ceramic Resonator VFO wasn&#8217;t much good (it drifted too much). This led us into standard Colpitts and Armstrong VFOs, and the fascinating world of temperature compensation. Then I remembered the Polyakov circuit &#8212; this would allow us to use a 3.5 MHz VFO on the 7 MHz band. Lower frequency VFOs are easier to stabilize, so I started building my first Polyakov receiver. You can see the results (on 40 meters) in the video above. <\/b><\/p>\n<p><b>I started working with a circuit from SPRAT 110 (Spring 2002). Rudi Burse DK2RS built a Polyakov receiver for 80 and 40 that he called the Lauser Plus. (Lauser means &#8220;young rascal&#8221; or &#8220;imp&#8221; in German.) For the AF amplifier, I just attached one of those cheap LM386 boards that you can get on the internet. With it, I sometimes use some old Iphone headphones, or an amplified computer speaker. <\/b><\/p>\n<div class=\"separator\" style=\"clear: both; text-align: center;\"><a href=\"https:\/\/www.homebrewradio.us\/blog\/wp-content\/uploads\/2022\/08\/Polyakov20Lauser20Plus.png\" style=\"margin-left: 1em; margin-right: 1em;\"><img loading=\"lazy\" decoding=\"async\" border=\"0\" data-original-height=\"334\" data-original-width=\"399\" height=\"335\" src=\"https:\/\/www.homebrewradio.us\/blog\/wp-content\/uploads\/2022\/08\/Polyakov20Lauser20Plus.png\" width=\"400\" \/><\/a><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"><b>The Polyakov mixer is a &#8220;switching mixer.&#8221; The book excerpt below shows how I understand these circuits. The enlightenment came from the Summer 1999 issue of SPRAT (click on the excerpt for an easier read): <\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: center;\"><a href=\"https:\/\/blogger.googleusercontent.com\/img\/b\/R29vZ2xl\/AVvXsEg1z8_5KHaBkzCAasEZhkKRpThzUYf6YYFp-0SrkXniz9WJHS4A3eq6mzBDgueV2-aH2vpDpu_Iy7WMJeGIbhzNaGjF6Xu2soHJCEIAv29FeSvPHpBtthdfIf5a7BvElOUQBuQ7xDuB3gy2MNo4pcq18qcK7WPU585rx_e35mr9XNM7ClPZDi2Leavh\/s794\/Leon's%20Mixer%20Circuit%20from%20Sprat.png\" style=\"margin-left: 1em; margin-right: 1em;\"><img loading=\"lazy\" decoding=\"async\" border=\"0\" data-original-height=\"794\" data-original-width=\"680\" height=\"400\" src=\"https:\/\/www.homebrewradio.us\/blog\/wp-content\/uploads\/2022\/08\/image_1752979426.png's%20Mixer%20Circuit%20from%20Sprat.png\" width=\"343\" \/><\/a><\/div>\n<div>\n<div class=\"separator\" style=\"clear: both; text-align: center;\"><a href=\"https:\/\/blogger.googleusercontent.com\/img\/b\/R29vZ2xl\/AVvXsEiHPCL6nxw7dL7w1w3yd145PFGHhaZRciBdCZ5GubKu3OssSkhWXOVDuKyo2gT6pfccIWG8SuvRzTT_zMJEVj10JOHFn78s3mkF8ilukTdNQGyfScIImBmeZnJU5nmlfO3tQrjXv-CFngWKhvTd1n5a4JfRkqh0QBaEmqYymC20ravZM1orfAezC9O7\/s602\/Output%20from%20Leon's%20Mixer.png\" style=\"margin-left: 1em; margin-right: 1em;\"><img loading=\"lazy\" decoding=\"async\" border=\"0\" data-original-height=\"303\" data-original-width=\"602\" height=\"201\" src=\"https:\/\/www.homebrewradio.us\/blog\/wp-content\/uploads\/2022\/08\/image_1752979420.png's%20Mixer.png\" width=\"400\" \/><\/a><\/div>\n<p><\/div>\n<p><b>Leon&#8217;s circuit shows us how a simple switching circuit in which the switches are controlled by the VFO can result in an output that has the sum and difference components. That is the hallmark (and most useful part) of real mixing. Remember &#8212; we say that mixing happens in non-linear circuits when the passage of one signal depends on what is happening with the other signal. A switch is as non-linear as you can get! And that switch is being controlled by the VFO. <\/b><\/p>\n<div><b><br \/><\/b><\/div>\n<div><b>In a Direct Conversion receiver we usually run the VFO at the operating frequency. This results in audio just above and just below the operating frequency. <\/b><\/div>\n<div><b><br \/><\/b><\/div>\n<div><b>The Polyakov Direct Conversion circuit is a bit different. It has the switches (the diodes) turned on twice each cycle: When the VFO voltage goes to a positive peak, this turns on one of the diodes. When the VFO goes to a negative peak, this turns on the other diode. So in effect the switch is being turned on TWICE each cycle. So with the Polyakov you run the VFO at HALF the operating frequency. For a DC receiver designed to run around 7.060 MHz, you build a VFO at around 3.53 MHz. This has some immediate advantages. My favorite is that it is easier to get a VFO stable at a lower frequency. It is easier to stabilize a VFO at 3.53 MHz than it is at 7.060 MHz. <\/b><\/div>\n<div><b><br \/><\/b><\/div>\n<div><b>When you open that SW 1 switch in the Lauser Plus, you no longer have a Polyakov mixer. Now you just have a diode mixer. It will be opening and closing once each cycle at the VFO frequency. DK2RS used this to cover not only the 40 meter band (in Polyakov mode) but also the 80 meter band (in single diode detector mode). That is why DK2RS has that big variable capacitor in the input circuit &#8212; that LC circuit needs to tune all the way down to 3.5 MHz and all the way up to around 7.3 MHz. (I used a coil of about 6.5 uH to do this.) <\/b><\/div>\n<div><b><br \/><\/b><\/div>\n<div><b>With just one diode and operating at 80 meters, it works, but not as well as it does in the Polyakov mode on 40. I can pick up 80 meter signals, but in this mode there seems to be more of an &#8220;AM breakthrough&#8221; problem. &#8220;Experimental Methods in RF Design&#8221; on page 8.11 describes what is going on (the last sentence is most relevant here): <\/b><\/p>\n<div class=\"separator\" style=\"clear: both; text-align: center;\"><a href=\"https:\/\/www.homebrewradio.us\/blog\/wp-content\/uploads\/2022\/08\/EMRFD20on20AM20DETECTION.jpeg\" style=\"margin-left: 1em; margin-right: 1em;\"><img loading=\"lazy\" decoding=\"async\" border=\"0\" data-original-height=\"1639\" data-original-width=\"736\" height=\"640\" src=\"https:\/\/www.homebrewradio.us\/blog\/wp-content\/uploads\/2022\/08\/EMRFD20on20AM20DETECTION.jpeg\" width=\"288\" \/><\/a><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: center;\"><\/div>\n<\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"><b>Here are some very good links with information on the Polyakov receiver: <\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"><b><br \/><\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"><b>LA8AK on Polyakov: <a href=\"http:\/\/noding.com\/la8ak\/c21.htm\">http:\/\/noding.com\/la8ak\/c21.htm<\/a><\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"><b>LA8AK&#8217;s Home Page: <a href=\"http:\/\/www.agder.net\/la8ak\/index1.htm\">http:\/\/www.agder.net\/la8ak\/index1.htm<\/a><\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"><b>LA8AK SK: <a href=\"http:\/\/www.agder.net\/la8ak\/\">http:\/\/www.agder.net\/la8ak\/<\/a> Almost seventeen years after his death he continues to help his fellow radio amateurs through his web sites. TNX OM! FB! <\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"><b>BH1RBG: <a href=\"https:\/\/sites.google.com\/site\/linuxdigitallab\/rf-ham-radio\/dc-polyakov-based-first-dc-receiver\">https:\/\/sites.google.com\/site\/linuxdigitallab\/rf-ham-radio\/dc-polyakov-based-first-dc-receiver<\/a><\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"><b>Hack-A-Day on Polyakov: <a href=\"https:\/\/hackaday.com\/2015\/11\/15\/polyakov-direct-digital-synthesis-receiver\/\">https:\/\/hackaday.com\/2015\/11\/15\/polyakov-direct-digital-synthesis-receiver\/<\/a><\/b><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\"><\/div>\n<div class=\"separator\" style=\"clear: both; text-align: left;\">\n<div>\n<div class=\"separator\" style=\"clear: both;\"><b>I will post a video tomorrow showing the receiver in operation on 80 meters. <\/b><\/div>\n<\/div>\n<div class=\"separator\" style=\"clear: both;\"><b><br \/><\/b><\/div>\n<div class=\"separator\" style=\"clear: both;\"><b>Three cheers for Vlad Polyakov, RA3AAE<\/b><\/div>\n<div><b><br \/><\/b><\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"<p>I&#8217;ve been reading about Polyakov (or &#8220;sub-harmonic&#8221;) Detectors for a long time: https:\/\/soldersmoke.blogspot.com\/search\/label\/Polyakov&#8211;Vladimir But until now, I never built one. Recently, Dean KK4DAS and the Vienna Wireless Makers group have been building a Direct Conversion receiver. Their receiver uses an Si5351 as the VFO, but of course Dean and I have decided to try to &hellip; <a href=\"https:\/\/www.homebrewradio.us\/blog\/2022\/08\/08\/polyakov-ra3aae-direct-conversion-receiver-40-meter-dc-rx-with-vfo-at-3-5-3-6-mhz-with-video\/\" class=\"more-link\">Continue reading<span class=\"screen-reader-text\"> &#8220;Polyakov (RA3AAE) Direct Conversion Receiver:  40 meter DC RX with VFO at 3.5 &#8211; 3.6 MHz (with video)&#8221;<\/span><\/a><\/p>\n","protected":false},"author":2,"featured_media":180,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[93,22,35,94,95,92,55,96,90,17,91,53],"tags":[],"class_list":["post-179","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-ceramic-resonators","category-china","category-direct-conversion","category-emrfd","category-germany","category-norway","category-polyakov-vladimir","category-russia","category-souleles-dean","category-sprat","category-temperature-compensation","category-vfo"],"_links":{"self":[{"href":"https:\/\/www.homebrewradio.us\/blog\/wp-json\/wp\/v2\/posts\/179","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.homebrewradio.us\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.homebrewradio.us\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.homebrewradio.us\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.homebrewradio.us\/blog\/wp-json\/wp\/v2\/comments?post=179"}],"version-history":[{"count":1,"href":"https:\/\/www.homebrewradio.us\/blog\/wp-json\/wp\/v2\/posts\/179\/revisions"}],"predecessor-version":[{"id":184,"href":"https:\/\/www.homebrewradio.us\/blog\/wp-json\/wp\/v2\/posts\/179\/revisions\/184"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.homebrewradio.us\/blog\/wp-json\/wp\/v2\/media\/180"}],"wp:attachment":[{"href":"https:\/\/www.homebrewradio.us\/blog\/wp-json\/wp\/v2\/media?parent=179"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.homebrewradio.us\/blog\/wp-json\/wp\/v2\/categories?post=179"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.homebrewradio.us\/blog\/wp-json\/wp\/v2\/tags?post=179"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}